Do not use this method on showers with stone.
Add 1/4 teaspoon of dishwashing liquid to help the solution cling to the glass.
Let the solution work for at least five minutes to break down the soap scum.
Photo:Jacob Fox, Prop Stylist: Lexi Juhl
This vinegar solution can be used as a daily cleanser.
If the vinegar solution has dried, add a bit more.
If you are cleaning with a squeegee, use the towel to remove any smudges or smears.
Jacob Fox, Prop Stylist: Lexi Juhl
However, even though it is milder, it should not be used around natural stone showers.
Mix equal parts lemon juice and distilled water in a spray bottle.
Add 1/4 teaspoon of dishwashing liquid.
Jacob Fox, Prop Stylist: Lexi Juhl
Start at the top of the glass door and spray the surface with the solution.
Let it work for about five minutes.
Starting at the top, wipe the glass with a non-abrasive sponge or squeegee.
Jacob Fox, Prop Stylist: Lexi Juhl
Working from the top down helps avoid smudging and streaks.
Rinse away any solution with water.
(If using a squeegee, rinsing may not be necessary.)
Jacob Fox, Prop Stylist: Lexi Juhl
Use a microfiber towel to dry the glass and remove streaks and smudges.
It has a very strong odor and should not becombined with other cleaning products.
However, it is effective on water stains.
Jacob Fox, Prop Stylist: Lexi Juhl
Open a window and be sure to have ventilation when cleaning with ammonia.
Plug it with an old washcloth or paper towel.
Step 2: Fill Track With Vinegar
Pour undiluted distilled white vinegar into the track.
Jacob Fox, Prop Stylist: Lexi Juhl
Let it sit and work for at least four hours or overnight.
Use a toothbrush to scrub away the soap scum and dirt.
Rinse the shower door track with distilled water.
Jacob Fox, Prop Stylist: Lexi Juhl
Scrub again (if needed) with a toothbrush dipped in vinegar.
Rinse and dry with a microfiber towel.
