We’re sharing several painting accessories that are worth the moneyplus the gimmicks to avoid.
There’s really no substitute for quality painting tools,adequate preparation, and careful work.
Once it’s on the wall, run a damp rag over the edge to create a seal.
Photo:Katelyn Perry
Brushes
A 2 1/2-inch angled brush was made for painting trim and cutting in.
Look for quality brands like Wooster, Purdy, and Benjamin Moore.
Rollers
A standard 9-inch roller with a synthetic core and a 3/8-inch nap is a classic.
You shouldn’t be able to close that opening," says Manfredini.
“Ace and Shur-Line both make quality roller covers.
Mini paint roller frames are also convenient for working around small spaces.”
“Get the 4-foot-wide runner length to use near the walls.”
Paint Brush Cleaner
This painting product ensures that painting newbies get theirquality brushes completely cleanfor future use.
Plastic Roller Tray
Instead of metal, buy a heavy-duty plastic tray.
Pre-Mixed Spackling
This product works for most patching jobs and nail holes.
You’ll also want caulk for filling in gaps between the walls and trim.
Putty Knife
Skip the 7-in-1 tool.
Instead, you’ll want a two-inch putty knife and a six-inch-wide taping knife, both with flexible blades.
They’ll help patch cracks and apply joint compound.
Sanding Sponges
A medium and fine grit sponge can handle most jobs.
“It will get the job done with zero dust.”
Rags
A damp rag or two is essential for quickly wiping up drips.
Paint Tray Liners
These aren’t necessary if you get a quality hard plastic paint tray.
Plus, it’s less wasteful if you don’t throw away a plastic liner each time you paint.
In the time it takes to refill it, you could already be painting," says Manfredini.
The exception here is the touch-up tool that Manfredini recommended specifically.
You’re better off properly taping trim and walls then using an angled brush.
will do the job just fine, even if it takes an extra minute or two.
